Gönderen Konu: dpm ve donma  (Okunma sayısı 1543 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Çevrimdışı caliban

  • İleti: 381
dpm ve donma
« : 10 Mayıs 2014 - 19:54:36 »
dpm (Dynamic frequency switching) kernel'in ati kartlar için geliştirdiği dinamik güç yöneticisi  kullanmaya başladığımdan beri bazı anlarda, tamamen rastgele laptop tamamen donuyor. alt +f2 bile yanıt vermiyor. fare işaretçisi haraket ediyor ama hiç bir yere taklanmıyor. ekran öylece donuyor.  bir iki defa firefox kullanırken ve xscreensaver(ekran koruyucu) açıkken donmalar oluyor. dpm kullanıpta bu tür şeyler yaşayanlar var mı?


Kod: [Seç]
lspci | egrep "VGA|3D|Display"
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650]


acaba ekran kartım dpm'i desteklemiyor mu? bu gibi durumlar hariç her şey sorunsuz çalışıyor. film, ve flash uygulamalarını  izlerken hiç bir sorun yok.



xorg dosyası
Kod: [Seç]
$cat /etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
       Identifier  "My Graphics Card"
       Option "AccelMethod" "EXA"
       Option "EXAVSync" "yes"
EndSection


/var/log/Xorg.0.log dosyası.


Kod: [Seç]
[    19.645] (II) [KMS] Kernel modesetting enabled.
[    19.645] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    19.645] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    19.645] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    19.645] (==) RADEON(0): Default visual is TrueColor
[    19.645] (**) RADEON(0): Option "AccelMethod" "EXA"
[    19.645] (**) RADEON(0): Option "EXAVSync" "yes"
[    19.645] (==) RADEON(0): RGB weight 888
[    19.645] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    19.645] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3650" (ChipID = 0x9591)
[    19.645] (II) Loading sub module "dri2"
[    19.645] (II) LoadModule: "dri2"
[    19.645] (II) Module "dri2" already built-in
[    19.645] (II) Loading sub module "exa"
[    19.645] (II) LoadModule: "exa"
[    19.645] (II) Loading /usr/lib/xorg/modules/libexa.so
[    19.654] (II) Module exa: vendor="X.Org Foundation"
[    19.654] compiled for 1.15.1, module version = 2.6.0
[    19.654] ABI class: X.Org Video Driver, version 15.0
[    19.654] (II) RADEON(0): KMS Color Tiling: enabled
[    19.654] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    19.654] (II) RADEON(0): KMS Pageflipping: enabled
[    19.654] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    19.673] (II) RADEON(0): Output VGA-0 has no monitor section
[    19.673] (II) RADEON(0): Output LVDS has no monitor section
[    19.676] (II) RADEON(0): Output HDMI-0 has no monitor section
[    19.693] (II) RADEON(0): Output DIN has no monitor section
[    19.713] (II) RADEON(0): EDID for output VGA-0
[    19.714] (II) RADEON(0): EDID for output LVDS
[    19.714] (II) RADEON(0): Manufacturer: SEC  Model: 3041  Serial#: 0
[    19.714] (II) RADEON(0): Year: 2008  Week: 0
[    19.714] (II) RADEON(0): EDID Version: 1.3
[    19.714] (II) RADEON(0): Digital Display Input
[    19.714] (II) RADEON(0): Max Image Size [cm]: horiz.: 35  vert.: 20
[    19.714] (II) RADEON(0): Gamma: 2.20
[    19.714] (II) RADEON(0): No DPMS capabilities specified
[    19.714] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    19.714] (II) RADEON(0): First detailed timing is preferred mode
[    19.714] (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    19.714] (II) RADEON(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    19.714] (II) RADEON(0): Manufacturer's mask: 0
[    19.714] (II) RADEON(0): Supported detailed timing:
[    19.714] (II) RADEON(0): clock: 69.9 MHz   Image Size:  353 x 198 mm
[    19.714] (II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1474 h_border: 0
[    19.714] (II) RADEON(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    19.714] (II) RADEON(0): Unknown vendor-specific block f
[    19.714] (II) RADEON(0):  SAMSUNG
[    19.714] (II) RADEON(0):  160AT01-T02
[    19.714] (II) RADEON(0): EDID (in hex):
[    19.714] (II) RADEON(0): 00ffffffffffff004ca3413000000000
[    19.714] (II) RADEON(0): 00120103802314780a87f594574f8c27
[    19.714] (II) RADEON(0): 27505400000001010101010101010101
[    19.714] (II) RADEON(0): 0101010101014a1b566c500016303020
[    19.714] (II) RADEON(0): 250061c6100000190000000f00000000
[    19.714] (II) RADEON(0): 00000000001eb4027400000000fe0053
[    19.714] (II) RADEON(0): 414d53554e470a2020202020000000fe
[    19.714] (II) RADEON(0): 00313630415430312d5430320a2000dc
[    19.714] (II) RADEON(0): Printing probed modes for output LVDS
[    19.715] (II) RADEON(0): Modeline "1366x768"x60.0   69.86  1366 1414 1446 1474  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    19.715] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    19.715] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    19.715] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    19.715] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    19.715] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    19.715] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    19.715] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    19.718] (II) RADEON(0): EDID for output HDMI-0
[    19.737] (II) RADEON(0): EDID for output DIN
[    19.737] (II) RADEON(0): Output VGA-0 disconnected
[    19.737] (II) RADEON(0): Output LVDS connected
[    19.737] (II) RADEON(0): Output HDMI-0 disconnected
[    19.737] (II) RADEON(0): Output DIN disconnected
[    19.737] (II) RADEON(0): Using exact sizes for initial modes
[    19.737] (II) RADEON(0): Output LVDS using initial mode 1366x768
[    19.737] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.737] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fba0000
[    19.737] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    19.737] (==) RADEON(0): DPI set to (96, 96)
[    19.737] (II) Loading sub module "fb"
[    19.737] (II) LoadModule: "fb"
[    19.737] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.753] (II) Module fb: vendor="X.Org Foundation"
[    19.753] compiled for 1.15.1, module version = 1.0.0
[    19.753] ABI class: X.Org ANSI C Emulation, version 0.4
[    19.753] (II) Loading sub module "ramdac"
[    19.753] (II) LoadModule: "ramdac"
[    19.753] (II) Module "ramdac" already built-in
[    19.753] (--) Depth 24 pixmap format is 32 bpp
[    19.757] (II) RADEON(0): [DRI2] Setup complete
[    19.757] (II) RADEON(0): [DRI2]   DRI driver: r600
[    19.757] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    19.757] (II) RADEON(0): Front buffer size: 4128K
[    19.757] (II) RADEON(0): VRAM usage limit set to 464083K
[    19.778] (==) RADEON(0): Backing store enabled
[    19.778] (II) RADEON(0): Direct rendering enabled
[    19.778] (II) RADEON(0): EXA VSync enabled
[    19.778] (II) EXA(0): Driver allocated offscreen pixmaps
[    19.778] (II) EXA(0): Driver registered support for the following operations:
[    19.778] (II)         Solid
[    19.778] (II)         Copy
[    19.778] (II)         Composite (RENDER acceleration)
[    19.778] (II)         UploadToScreen
[    19.778] (II)         DownloadFromScreen
[    19.778] (II) RADEON(0): Acceleration enabled
[    19.778] (==) RADEON(0): DPMS enabled
[    19.778] (==) RADEON(0): Silken mouse enabled
[    19.780] (II) RADEON(0): Set up textured video
[    19.780] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    19.780] (II) RADEON(0): [XvMC] Extension initialized.
[    19.780] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.781] (--) RandR disabled
[    20.658] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.658] (II) AIGLX: enabled GLX_ARB_create_context
[    20.658] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    20.658] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    20.658] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.658] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.658] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    20.658] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    20.658] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.659] (II) AIGLX: Loaded and initialized r600
[    20.659] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.673] (II) RADEON(0): Setting screen physical size to 361 x 203
[    21.112] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    21.112] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.112] (II) LoadModule: "evdev"
[    21.112] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.134] (II) Module evdev: vendor="X.Org Foundation"
[    21.134] compiled for 1.15.1, module version = 2.8.4
[    21.134] Module class: X.Org XInput Driver
[    21.134] ABI class: X.Org XInput driver, version 20.0
[    21.134] (II) Using input driver 'evdev' for 'Power Button'
[    21.134] (**) Power Button: always reports core events
[    21.134] (**) evdev: Power Button: Device: "/dev/input/event5"
[    21.134] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.134] (--) evdev: Power Button: Found keys
[    21.134] (II) evdev: Power Button: Configuring as keyboard
[    21.134] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    21.134] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.134] (**) Option "xkb_rules" "evdev"
[    21.134] (**) Option "xkb_model" "pc104"
[    21.134] (**) Option "xkb_layout" "tr"
[    21.174] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    21.174] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.174] (II) Using input driver 'evdev' for 'Video Bus'
[    21.174] (**) Video Bus: always reports core events
[    21.174] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    21.174] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.174] (--) evdev: Video Bus: Found keys
[    21.174] (II) evdev: Video Bus: Configuring as keyboard
[    21.174] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event6"
[    21.174] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    21.174] (**) Option "xkb_rules" "evdev"
[    21.174] (**) Option "xkb_model" "pc104"
[    21.174] (**) Option "xkb_layout" "tr"
[    21.175] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    21.175] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.175] (II) Using input driver 'evdev' for 'Power Button'
[    21.175] (**) Power Button: always reports core events
[    21.175] (**) evdev: Power Button: Device: "/dev/input/event4"
[    21.175] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.175] (--) evdev: Power Button: Found keys
[    21.175] (II) evdev: Power Button: Configuring as keyboard
[    21.175] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event4"
[    21.175] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    21.175] (**) Option "xkb_rules" "evdev"
[    21.175] (**) Option "xkb_model" "pc104"
[    21.175] (**) Option "xkb_layout" "tr"
[    21.175] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    21.175] (II) No input driver specified, ignoring this device.
[    21.175] (II) This device may have been added with another device file.
[    21.175] (II) config/udev: Adding drm device (/dev/dri/card0)
[    21.176] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[    21.176] (II) No input driver specified, ignoring this device.
[    21.176] (II) This device may have been added with another device file.
[    21.176] (II) config/udev: Adding input device Chicony USB 2.0 Camera (/dev/input/event15)
[    21.176] (**) Chicony USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    21.176] (II) Using input driver 'evdev' for 'Chicony USB 2.0 Camera'
[    21.176] (**) Chicony USB 2.0 Camera: always reports core events
[    21.176] (**) evdev: Chicony USB 2.0 Camera: Device: "/dev/input/event15"
[    21.176] (--) evdev: Chicony USB 2.0 Camera: Vendor 0x4f2 Product 0xb008
[    21.176] (--) evdev: Chicony USB 2.0 Camera: Found keys
[    21.176] (II) evdev: Chicony USB 2.0 Camera: Configuring as keyboard
[    21.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input16/event15"
[    21.177] (II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD, id 9)
[    21.177] (**) Option "xkb_rules" "evdev"
[    21.177] (**) Option "xkb_model" "pc104"
[    21.177] (**) Option "xkb_layout" "tr"
[    21.177] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    21.177] (II) No input driver specified, ignoring this device.
[    21.177] (II) This device may have been added with another device file.
[    21.177] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[    21.177] (II) No input driver specified, ignoring this device.
[    21.177] (II) This device may have been added with another device file.
[    21.177] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event11)
[    21.177] (II) No input driver specified, ignoring this device.
[    21.177] (II) This device may have been added with another device file.
[    21.178] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
[    21.178] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[    21.178] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    21.178] (**) A4TECH USB Device: always reports core events
[    21.178] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
[    21.178] (II) evdev: A4TECH USB Device: Using mtdev for this device
[    21.178] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    21.178] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[    21.178] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    21.178] (--) evdev: A4TECH USB Device: Found relative axes
[    21.178] (--) evdev: A4TECH USB Device: Found absolute axes
[    21.178] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[    21.178] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[    21.178] (--) evdev: A4TECH USB Device: Found keys
[    21.178] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[    21.178] (II) evdev: A4TECH USB Device: Configuring as mouse
[    21.178] (II) evdev: A4TECH USB Device: Configuring as keyboard
[    21.178] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    21.178] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    21.178] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.178] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:09DA:054F.0001/input/input2/event1"
[    21.178] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 10)
[    21.178] (**) Option "xkb_rules" "evdev"
[    21.178] (**) Option "xkb_model" "pc104"
[    21.178] (**) Option "xkb_layout" "tr"
[    21.178] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    21.178] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[    21.179] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    21.179] (**) A4TECH USB Device: (accel) acceleration profile 0
[    21.179] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    21.179] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    21.179] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[    21.179] (II) No input driver specified, ignoring this device.
[    21.179] (II) This device may have been added with another device file.
[    21.179] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
[    21.179] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[    21.179] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    21.179] (**) A4TECH USB Device: always reports core events
[    21.179] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
[    21.179] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    21.179] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[    21.179] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    21.179] (--) evdev: A4TECH USB Device: Found relative axes
[    21.179] (--) evdev: A4TECH USB Device: Found x and y relative axes
[    21.179] (II) evdev: A4TECH USB Device: Configuring as mouse
[    21.179] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    21.179] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    21.179] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.179] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:09DA:054F.0002/input/input3/event2"
[    21.179] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 11)
[    21.179] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    21.180] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    21.180] (**) A4TECH USB Device: (accel) acceleration profile 0
[    21.180] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    21.180] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    21.180] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[    21.180] (II) No input driver specified, ignoring this device.
[    21.180] (II) This device may have been added with another device file.
[    21.180] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    21.180] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    21.180] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    21.180] (**) AT Translated Set 2 keyboard: always reports core events
[    21.180] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    21.180] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    21.180] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    21.180] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    21.180] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    21.180] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    21.180] (**) Option "xkb_rules" "evdev"
[    21.180] (**) Option "xkb_model" "pc104"
[    21.180] (**) Option "xkb_layout" "tr"
[    21.181] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event14)
[    21.181] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    21.181] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS GlidePoint'
[    21.181] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    21.181] (**) evdev: AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event14"
[    21.181] (--) evdev: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    21.181] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons
[    21.181] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute axes
[    21.181] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
[    21.181] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute touchpad.
[    21.181] (II) evdev: AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
[    21.181] (**) evdev: AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
[    21.181] (**) evdev: AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.181] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event14"
[    21.181] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[    21.181] (II) evdev: AlpsPS/2 ALPS GlidePoint: initialized for absolute axes.
[    21.181] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    21.181] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
[    21.181] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    21.181] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    21.181] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[    21.181] (II) No input driver specified, ignoring this device.
[    21.181] (II) This device may have been added with another device file.
[    21.182] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event13)
[    21.182] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[    21.182] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[    21.182] (**) ALPS PS/2 Device: always reports core events
[    21.182] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event13"
[    21.182] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[    21.182] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[    21.182] (--) evdev: ALPS PS/2 Device: Found relative axes
[    21.182] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[    21.182] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[    21.182] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[    21.182] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.182] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event13"
[    21.182] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 14)
[    21.182] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[    21.182] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[    21.182] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[    21.182] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[    21.182] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[    21.182] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse1)
[    21.182] (II) No input driver specified, ignoring this device.
[    21.182] (II) This device may have been added with another device file.
[    21.182] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    21.182] (II) No input driver specified, ignoring this device.
[    21.182] (II) This device may have been added with another device file.
[    21.183] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)
[    21.183] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[    21.183] (II) Using input driver 'evdev' for 'Toshiba input device'
[    21.183] (**) Toshiba input device: always reports core events
[    21.183] (**) evdev: Toshiba input device: Device: "/dev/input/event7"
[    21.183] (--) evdev: Toshiba input device: Vendor 0 Product 0
[    21.183] (--) evdev: Toshiba input device: Found keys
[    21.183] (II) evdev: Toshiba input device: Configuring as keyboard
[    21.183] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[    21.183] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 15)
[    21.183] (**) Option "xkb_rules" "evdev"
[    21.183] (**) Option "xkb_model" "pc104"
[    21.183] (**) Option "xkb_layout" "tr"
[    34.543] (II) RADEON(0): EDID vendor "SEC", prod id 12353
[    34.543] (II) RADEON(0): Printing DDC gathered Modelines:
[    34.543] (II) RADEON(0): Modeline "1366x768"x0.0   69.86  1366 1414 1446 1474  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    34.583] (II) RADEON(0): EDID vendor "SEC", prod id 12353
[    34.583] (II) RADEON(0): Printing DDC gathered Modelines:
[    34.583] (II) RADEON(0): Modeline "1366x768"x0.0   69.86  1366 1414 1446 1474  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    34.780] (II) RADEON(0): EDID vendor "SEC", prod id 12353
[    34.780] (II) RADEON(0): Printing DDC gathered Modelines:
[    34.780] (II) RADEON(0): Modeline "1366x768"x0.0   69.86  1366 1414 1446 1474  768 770 775 790 -hsync -vsync (47.4 kHz eP)


başka ne çıktısı verebilirim bilmiyorum. bug olabilir mi acaba çünkü her şey sorunsuz çalışıyor. aksıyan bir şey yok görünüşte.



dpm hakkında bilgi;

https://wiki.archlinux.org/index.php/ATI#Dynamic_frequency_switching" class="bbc_link" target="_blank">http://https://wiki.archlinux.org/index.php/ATI#Dynamic_frequency_switching
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »

Çevrimdışı caliban

  • İleti: 381
Re: dpm ve donma
« Yanıtla #1 : 10 Mayıs 2014 - 20:37:00 »
ingilizcem yettiğince bu soruyu resmi forumlarda da sordum şöyle bir cevap geldi;




Alıntı
You are probably experencing this bug. On my system (RV620) kernel 3.14 fixed almost every issue with DPM, although reports from other people are mixed.


https://bugs.freedesktop.org/show_bug.cgi?id=66963



acaba burada çözüme dair bir bilgi var mı? benim ingilizcem yetmedi de :D lütfen yardımlarınızı bekliyorum :) kernel güncellemeleri bu sorunu çözer mi acaba? 3.15 rc yi yüklesem mi?
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »

Çevrimdışı caliban

  • İleti: 381
Re: dpm ve donma
« Yanıtla #2 : 12 Mayıs 2014 - 14:29:03 »
yanlış alarm :D benim yaşadığım aslında this bug  :D



beni yanıltan iki uygulamanın da aynı şekilde çökmesi oldu. ve sorunu kernel ve dpm yordum. chromium geçince sorun kalmadı.  uzun araştırmalarım meyvesini verdi :) cahillik işte.



monolog takıldığım bu başlık yöneticiler uygun görürse silinebilir.  :cool:
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »