Gönderen Konu: Chakra güncelleme sorunu  (Okunma sayısı 2384 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Çevrimdışı Okyanus

  • İleti: 16
Chakra güncelleme sorunu
« : 20 Mart 2012 - 01:14:50 »
An itibari ile 2012.02 Chakra'mdan yazıyorum:)



Sayın @hsngrms uyarınızı dikkate alarak şu an pacman üzerinden güncelleştirmeleri alıyorum.

Fakat şu hatayı aldım.
Kod: [Seç]


uyarı: core deposundan bazı dosyalar alınamadı
hata: işlem gerçekleştirilemedi (bazı dosyalar alınamadı)
Hata oluştu, hiçbir paket güncellenmedi.


Yanlış hatırlamıyorsam rc.conf ile ilgili bir hataydı.Yapılandırılmışını nereden bulabilirim ?
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Okyanus »

Çevrimdışı decent

  • Administrator
  • *****
  • İleti: 1.091
    • ARCHER KIM
  • Dağıtım: Arch Linux <:> Ubuntu
  • Sürüm: *
  • Ekran Kartı: Nvidia / ATI
RE: Chakra güncelleme sorunu
« Yanıtla #1 : 20 Mart 2012 - 01:32:41 »
@Okyanus, İletiyi resimli kurulum konusundan ayırarak yeni bir konu haline getirdim.



/etc/rc.conf

/etc/pacman.conf

/etc/pacman.d/mirrorlist



dosyalarının içeriğini görebilir miyiz ?
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: decent »

Çevrimdışı Okyanus

  • İleti: 16
Cvp: Chakra güncelleme sorunu
« Yanıtla #2 : 20 Mart 2012 - 01:39:18 »
Evet teşekkürler bende ona göre yeniden düzenledim mesajı, tam yazarken olunca dalgınlığıma geldi konu başlığı.



rc.conf:
Kod: [Seç]


# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="chakra-pc"

# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
#
# Wired network setup
#   - interface: name of device (required)
#   - address: IP address (leave blank for DHCP)
#   - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
#   - broadcast: broadcast address (ignored for DHCP) (optional)
#   - gateway: default route (ignored for DHCP)
#
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
#
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=

interface=
address=
netmask=
broadcast=
gateway=

# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"

# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
#   - set to 'menu' to present a menu during boot-up (dialog package required)
#   - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This requires the netcfg package
#
#NETWORKS=(main)


Network kısmı bu şekilde. İşin garibi terminali kapatıp yeniden denediğimde kaldığı yerden devam etti.


Tamamını aynı mesaja almadığı için parçalıyorum başka bir sorun varsa onuda görürsünüz hem.
Kod: [Seç]

# HARDWARE
# -----------------------------------------------------------------------
#
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
#   Replace every !module by an entry as on the following line in a file in
#   /etc/modprobe.d:
#     blacklist module
#   See "man modprobe.conf" for details.
#
MODULES=( nvidia nvidia ac battery button processor thermal video btusb cdrom agpgart intel-agp intel-gtt hid i2c-i801 i2c-core evdev joydev psmouse serio_raw media uvcvideo videodev wmi iTCO_vendor_support iTCO_wdt crc16 snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore scsi_mod ahci libahci r8169 mii bluetooth mac80211 rfkill iwlwifi cfg80211 usb-storage usbhid usbcore ehci-hcd uhci-hcd uas usb-common sd_mod sr_mod st ac)

# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30

# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"

# Scan for BTRFS volumes at startup
USEBTRFS="no"

# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"

Deamons boş zaten.



pacman.conf
Kod: [Seç]

#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
HoldPkg     = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst   = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg   =
#IgnoreGroup =

#NoUpgrade   =
#NoExtract   =

# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload

#
# REPOSITORIES
#   - can be defined here or included from another file
#   - pacman will search repositories in the order defined here
#   - local/custom mirrors can be added here or in separate files
#   - repositories listed first will take precedence when packages
#     have identical names, regardless of version number
#   - URLs will have $repo replaced by the name of the current repo
#
# Repository entries are of the format:
#       [repo-name]
#       Server = ServerName
#       Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#

[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
HoldPkg     = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst   = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[platform]
Include = /etc/pacman.d/mirrorlist

[desktop]
Include = /etc/pacman.d/mirrorlist

[apps]
Include = /etc/pacman.d/mirrorlist

[games]
Include = /etc/pacman.d/mirrorlist

#[unstable]
#Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Okyanus »

Çevrimdışı decent

  • Administrator
  • *****
  • İleti: 1.091
    • ARCHER KIM
  • Dağıtım: Arch Linux <:> Ubuntu
  • Sürüm: *
  • Ekran Kartı: Nvidia / ATI
RE: Chakra güncelleme sorunu
« Yanıtla #3 : 20 Mart 2012 - 01:50:28 »
İletiye sığmayan uçbirim çıktıları için pastebin.com gibi sitelere yapıştırıp buraya bağlantısını geçebilirsin.



/etc/pacman.d/mirrorlist

dosyasını da görebilir miyiz ?
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Anonymous »

Çevrimdışı Okyanus

  • İleti: 16
RE: Chakra güncelleme sorunu
« Yanıtla #4 : 20 Mart 2012 - 01:54:36 »
Kod: [Seç]


#
# Chakra Linux repository mirrorlist
# Generated on 2011-08-28 (by philm)
#

## America ##

# United States
Server = http://mirror.rit.edu/kdemod/$repo/i686
#Server = ftp://mirror.dacentec.com/chakra/$repo/i686
#Server = http://mirror.dacentec.com/chakra/$repo/i686

## Europa ##

# Czech Republic
#Server = http://ftp.sh.cvut.cz/MIRRORS/chakra/$repo/i686
#Server = ftp://ftp.sh.cvut.cz/MIRRORS/chakra/$repo/i686

# France
#Server = http://www-ftp.lip6.fr/pub/linux/distributions/chakra/$repo/i686
#Server = ftp://ftp.lip6.fr/pub/linux/distributions/chakra/$repo/i686
#Server = http://ftp.ciril.fr/pub/linux/chakra/$repo/i686
#Server = ftp://ftp.ciril.fr/pub/linux/chakra/$repo/i686

# Germany
#Server = http://chakra-project.org/repo/$repo/i686
#Server = http://mirror.selfnet.de/kdemod/$repo/i686
#Server = ftp://mirror.selfnet.de/kdemod/$repo/i686
#Server = http://mirror.wh-stuttgart.net/mirrors/kdemod/$repo/i686

# Greece
#Server = http://ftp.cc.uoc.gr/mirrors/linux/chakra/$repo/i686
#Server = ftp://ftp.cc.uoc.gr/mirrors/linux/chakra/$repo/i686
#Server = http://ftp.ntua.gr/pub/linux/chakra/$repo/i686
#Server = ftp://ftp.ntua.gr/pub/linux/chakra/$repo/i686

# Italy
#Server =  http://chakra.mirror.garr.it/mirrors/chakra/$repo/i686

# Switzerland
#Server = http://archlinux.puzzle.ch/kdemod/$repo/i686

# Spain
#Server = http://ftp.caliu.cat/pub/distribucions/chakra/repo/$repo/i686

## Russia  ##

# Russia
#Server = http://mirror.tspu.ru/chakra-project/$repo/i686

##  Asia   ##

# China
#Server = http://oss.ustc.edu.cn/kdemod/$repo/i686
#Server = http://debian.cn99.com/kdemod/$repo/i686
#Server = http://mirrors.163.com/kdemod/$repo/i686

# Japan
#Server = http://ftp.yz.yamagata-u.ac.jp/pub/linux/chakra/$repo/i686
#Server = ftp://ftp.yz.yamagata-u.ac.jp/pub/linux/chakra/$repo/i686

#Taiwan
#Server = http://free.nchc.org.tw/chakra/$repo/i686
#Server = ftp://free.nchc.org.tw/chakra/$repo/i686


Site mahkeme kararıyla engellendi. Anonymous sağolsun.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Anonymous »

Çevrimdışı decent

  • Administrator
  • *****
  • İleti: 1.091
    • ARCHER KIM
  • Dağıtım: Arch Linux <:> Ubuntu
  • Sürüm: *
  • Ekran Kartı: Nvidia / ATI
RE: Chakra güncelleme sorunu
« Yanıtla #5 : 20 Mart 2012 - 02:01:10 »
pastebin sitesini uzun zamandır kullanmamıştım, engellendiğini bilmiyordum.



/etc/pacman.d/mirrorlist



dosyasındaki açık durumda olan yansıyı değiştirerek farklı bir yansı seçebilir misin ?



Tavsiyelerim, İtalya ve Fransa yansıları..



Örnek verecek olursam;


Kod: [Seç]
#
# Chakra Linux repository mirrorlist
# Generated on 2011-08-28 (by philm)
#

## America ##

# United States
#Server = http://mirror.rit.edu/kdemod/$repo/i686
#Server = ftp://mirror.dacentec.com/chakra/$repo/i686
#Server = http://mirror.dacentec.com/chakra/$repo/i686

## Europa ##

# Czech Republic
#Server = http://ftp.sh.cvut.cz/MIRRORS/chakra/$repo/i686
#Server = ftp://ftp.sh.cvut.cz/MIRRORS/chakra/$repo/i686

# France
#Server = http://www-#ftp.lip6.fr/pub/linux/distributions/chakra/$repo/i686
#Server = ftp://ftp.lip6.fr/pub/linux/distributions/chakra/$repo/i686
#Server = http://ftp.ciril.fr/pub/linux/chakra/$repo/i686
#Server = ftp://ftp.ciril.fr/pub/linux/chakra/$repo/i686

# Germany
#Server = http://chakra-project.org/repo/$repo/i686
#Server = http://mirror.selfnet.de/kdemod/$repo/i686
#Server = ftp://mirror.selfnet.de/kdemod/$repo/i686
#Server = http://mirror.wh-stuttgart.net/mirrors/kdemod/$repo/i686

# Greece
#Server = http://ftp.cc.uoc.gr/mirrors/linux/chakra/$repo/i686
#Server = ftp://ftp.cc.uoc.gr/mirrors/linux/chakra/$repo/i686
#Server = http://ftp.ntua.gr/pub/linux/chakra/$repo/i686
#Server = ftp://ftp.ntua.gr/pub/linux/chakra/$repo/i686

# Italy
Server =  http://chakra.mirror.garr.it/mirrors/chakra/$repo/i686

# Switzerland
#Server = http://archlinux.puzzle.ch/kdemod/$repo/i686

# Spain
#Server = http://ftp.caliu.cat/pub/distribucions/chakra/repo/$repo/i686

## Russia  ##

# Russia
#Server = http://mirror.tspu.ru/chakra-project/$repo/i686

##  Asia   ##

# China
#Server = http://oss.ustc.edu.cn/kdemod/$repo/i686
#Server = http://debian.cn99.com/kdemod/$repo/i686
#Server = http://mirrors.163.com/kdemod/$repo/i686

# Japan
#Server = http://ftp.yz.yamagata-u.ac.jp/pub/linux/chakra/$repo/i686
#Server = ftp://ftp.yz.yamagata-u.ac.jp/pub/linux/chakra/$repo/i686

#Taiwan
#Server = http://free.nchc.org.tw/chakra/$repo/i686
#Server = ftp://free.nchc.org.tw/chakra/$repo/i686


Uçbirimden,
Kod: [Seç]
su
pacman -Sy

çıktısına bakabiliriz.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: decent »

Çevrimdışı Okyanus

  • İleti: 16
RE: Chakra güncelleme sorunu
« Yanıtla #6 : 20 Mart 2012 - 02:05:30 »
Tamam değiştiriyorum.

Anonymous grubu siteyi sıkça kullanıyormuş, son yaptığı saldırılardan sonra hükümet ele geçirdikleri bilgileri oradan silmesini istemiş.Silinmeyince engellemiş..Yorum yok...Teşekkürler ilginize.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Anonymous »

Çevrimdışı mete13

  • İleti: 107
Cvp: Cvp: Chakra güncelleme sorunu
« Yanıtla #7 : 20 Mart 2012 - 11:31:27 »
Alıntı yapılan: "Okyanus"

Evet teşekkürler bende ona göre yeniden düzenledim mesajı, tam yazarken olunca dalgınlığıma geldi konu başlığı.



rc.conf:
Kod: [Seç]


# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="chakra-pc"

# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
#
# Wired network setup
#   - interface: name of device (required)
#   - address: IP address (leave blank for DHCP)
#   - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
#   - broadcast: broadcast address (ignored for DHCP) (optional)
#   - gateway: default route (ignored for DHCP)
#
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
#
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=

interface=
address=
netmask=
broadcast=
gateway=

# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"

# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
#   - set to 'menu' to present a menu during boot-up (dialog package required)
#   - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This requires the netcfg package
#
#NETWORKS=(main)


Network kısmı bu şekilde. İşin garibi terminali kapatıp yeniden denediğimde kaldığı yerden devam etti.


Tamamını aynı mesaja almadığı için parçalıyorum başka bir sorun varsa onuda görürsünüz hem.
Kod: [Seç]

# HARDWARE
# -----------------------------------------------------------------------
#
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
#   Replace every !module by an entry as on the following line in a file in
#   /etc/modprobe.d:
#     blacklist module
#   See "man modprobe.conf" for details.
#
MODULES=( nvidia nvidia ac battery button processor thermal video btusb cdrom agpgart intel-agp intel-gtt hid i2c-i801 i2c-core evdev joydev psmouse serio_raw media uvcvideo videodev wmi iTCO_vendor_support iTCO_wdt crc16 snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore scsi_mod ahci libahci r8169 mii bluetooth mac80211 rfkill iwlwifi cfg80211 usb-storage usbhid usbcore ehci-hcd uhci-hcd uas usb-common sd_mod sr_mod st ac)

# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30

# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"

# Scan for BTRFS volumes at startup
USEBTRFS="no"

# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"

Deamons boş zaten.



pacman.conf
Kod: [Seç]

#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
HoldPkg     = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst   = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg   =
#IgnoreGroup =

#NoUpgrade   =
#NoExtract   =

# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload

#
# REPOSITORIES
#   - can be defined here or included from another file
#   - pacman will search repositories in the order defined here
#   - local/custom mirrors can be added here or in separate files
#   - repositories listed first will take precedence when packages
#     have identical names, regardless of version number
#   - URLs will have $repo replaced by the name of the current repo
#
# Repository entries are of the format:
#       [repo-name]
#       Server = ServerName
#       Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#

[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
HoldPkg     = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst   = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[platform]
Include = /etc/pacman.d/mirrorlist

[desktop]
Include = /etc/pacman.d/mirrorlist

[apps]
Include = /etc/pacman.d/mirrorlist

[games]
Include = /etc/pacman.d/mirrorlist

#[unstable]
#Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs



İlk önce rc.conf dosyası içinde ki

interface= yazan yere "eth0" yaz. O yazılı değil. Ondan sonra tekrar dene
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Anonymous »
01001110011001010010000001001101011101010111010001101100011101010010000001010100111111000111001001101011111111000110110100100000010001000110100101111001011001010110111001100101

T.C

Çevrimdışı Okyanus

  • İleti: 16
RE: Chakra güncelleme sorunu
« Yanıtla #8 : 20 Mart 2012 - 19:42:01 »
Chakra sağolsun onu sorun etmiyor, otomatik halletti.Yansıları değiştirdim öncelikle güncelleştirmeleri sorunsuzca kurdum ikinci deneyişimde.Şimdi orayıda düzenliyorum teşekkürler.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Anonymous »

Çevrimdışı Göktürk

  • Newbie
  • *
  • İleti: 8
RE: Chakra güncelleme sorunu
« Yanıtla #9 : 21 Mart 2012 - 00:51:19 »
her güncellemede kuran ve ben için böyle sorun teşkil etmezdir umarım:)
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Anonymous »