Gönderen Konu: Linux Önerisi  (Okunma sayısı 3547 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Çevrimdışı Emresaygın

  • İleti: 65
Linux Önerisi
« : 13 Eylül 2015 - 21:05:25 »
Merhaba arkadaşlar pc'de arch linux kurulu idi fakat aniden ctrl usb failed türünden bir hata verdi ve sistemi açmıyordu akabinde windowsa geçmek zorunda kaldım. Arch linux'u çok övüyorlar'dı ağzımın payını aldım. Yeni bir linux dağıtımı düşünüyorum görsellik ve stabilite çok önemli ve hata en aza indirilmiş bir işletim sistemi olursa süper olur şimdi KaOs Linux'u indiriyorum. Tavsiyelerinizi bekliyorum...
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı cumali

  • Administrator
  • *****
  • İleti: 2.228
Re: Linux Önerisi
« Yanıtla #1 : 13 Eylül 2015 - 21:49:36 »
Merhaba @Emresaygın, Arch Linux kurulu bir sistem durup durduğu yerde çökmez yada sistem açılmamazlık yapmaz. Kullanıcı hatalalarının Arch Linux'a maledilmesini anlamakta sıkıntı çekiyorum. Yıllardır Arch Linux kullanıcısı olarak sistemin açılmaması gibi bir sorunla karşılaşmadım. Neyse  KaOs Linux da pacman paket yöneticisine sahip Arch tabanlı bir Linux dağıtımıdır. Bildigim kadar Kde masaüstü kullanılmaktadır. Deneyip bir müddet kullanın derim. Ek olarak yine Arch tabanlı Manjaro Linux kullanmanızı önerebilirim.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »

Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #2 : 13 Eylül 2015 - 21:56:26 »
Alıntı yapılan: "cumali"
Merhaba @Emresaygın, Arch Linux kurulu bir sistem durup durduğu yerde çökmez yada sistem açılmamazlık yapmaz. Kullanıcı hatalalarının Arch Linux'a maledilmesini anlamakta sıkıntı çekiyorum. Yıllardır Arch Linux kullanıcısı olarak sistemin açılmaması gibi bir sorunla karşılaşmadım. Neyse  KaOs Linux da pacman paket yöneticisine sahip Arch tabanlı bir Linux dağıtımıdır. Bildigim kadar Kde masaüstü kullanılmaktadır. Deneyip bir müddet kullanın derim. Ek olarak yine Arch tabanlı Manjaro Linux kullanmanızı önerebilirim.


Öncelikle yorumunuz için teşekkürler. Durup dururkenden kastım yeniden başlatırken usb_submit_urb(ctrl) failed bu hatayı verdi ve ne gelişmiş seçeneklerle nede başka bir seçenekle açılmadı. Bu yüzden Arch linux'tan windows'a geçiş yapmak zorunda kaldım. Manjaroyu'da Arch Linux'u kurmadan önce denemiştim fakat videolarda donma oluyordu ve ondada açılmama sorunu ortaya çıktı linux kullanmak istiyorum ama pc istemiyor sanırım ...
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı PcKopat

  • İleti: 18
Re: Linux Önerisi
« Yanıtla #3 : 13 Eylül 2015 - 23:43:54 »
@Emresaygın,  @cumali ye katılıyorum. Sadece Arch Linux değil düzgün yapılandırılmış hiçbir dağıtım durduk yere çökmez. Ha elektirikler kesilir yanlış veri yazımı olur donanımsal sıkıntı vardır o ayrı bir konu. Arch gibi yuvarlanan bir sistem istiyorsan(ki Arch tabanlı oluyor sanırım) bende Manjaro Linux u öneririm.Hem son kullanıcı açısından avantajlı hem de iyi iş çıkarıyorlar. Ha dersen ki çok stabil olsun Debian derim. Ama güncel program istiyorsan hüsrana uğrayabilirsin(Tabi sadece kendi depolarını kullanacaksan(Yanlışım varsa düzeltin -_-)). Dersen ki günceli takip etsin ama stabil de olsun Linux Mint derim. LMDE(Linix Mint Debian Edition) de sanırım yarı yuvarlanan bir sürüm olarak geçiyordu hiç kullanmadım ama araştırabilirsin ;)
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »

Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #4 : 14 Eylül 2015 - 00:14:09 »
Alıntı yapılan: "PcKopat"
@Emresaygın,  @cumali ye katılıyorum. Sadece Arch Linux değil düzgün yapılandırılmış hiçbir dağıtım durduk yere çökmez. Ha elektirikler kesilir yanlış veri yazımı olur donanımsal sıkıntı vardır o ayrı bir konu. Arch gibi yuvarlanan bir sistem istiyorsan(ki Arch tabanlı oluyor sanırım) bende Manjaro Linux u öneririm.Hem son kullanıcı açısından avantajlı hem de iyi iş çıkarıyorlar. Ha dersen ki çok stabil olsun Debian derim. Ama güncel program istiyorsan hüsrana uğrayabilirsin(Tabi sadece kendi depolarını kullanacaksan(Yanlışım varsa düzeltin -_-)). Dersen ki günceli takip etsin ama stabil de olsun Linux Mint derim. LMDE(Linix Mint Debian Edition) de sanırım yarı yuvarlanan bir sürüm olarak geçiyordu hiç kullanmadım ama araştırabilirsin ;)


hmm Manjaro'yu denedim fakat olumlu sonuç alamadım maalesef. Şu anda KaOS'u usb'ye yazdırıyorum. Bitince kurup denicem en olmadı mint olacak gibi görünüyor :(
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı ata

  • İleti: 410
Re: Linux Önerisi
« Yanıtla #5 : 14 Eylül 2015 - 03:39:17 »
xbuntu ile devam edin bence xfce masa üüstü fazlla yormaz sistemi .ve daha basıttır kullanımı fazla terminale düşmeden sonkullanıcı dostudur . tam sızlık

hayırlı formlar
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
<r>Celladına aşık olmuşsa bir millet,

İster ezan ister çan dinlet.

İtiraz etmiyorsa sürü gibi millet,

Müstehaktır ona her türlü zillet.\"



Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #6 : 14 Eylül 2015 - 09:20:20 »
Alıntı yapılan: "ata"
xbuntu ile devam edin bence xfce masa üüstü fazlla yormaz sistemi .ve daha basıttır kullanımı fazla terminale düşmeden sonkullanıcı dostudur . tam sızlık

hayırlı formlar




Hocam halbuki pc özellikleride iyi ama ...
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı ata

  • İleti: 410
Re: Linux Önerisi
« Yanıtla #7 : 14 Eylül 2015 - 14:24:49 »
şahsi fikrimdir ilk başlangıç için iyi bir saçimdir xbuntu xfce ve linux ortamına alışmanızı sağlar.sonrasında geliştikçe zaten kendiniz karar verirsiniz .manjaro önerecektim denemiş ve sorun yaşamışsınız . arch kurmayı başarmış olup onu devam ettirememek kötü bir dürüm manjaro ve arch kurulu kendı hurda pc me ama şimdiyekadar ufak sorrunlar hariç.

hiç kediliğinden sistem açılmadığına rastlamadım ,sisteme farklı ekrankartı kurdum yanlışlıkla onda bile loıng ekranından geri geldi .
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
<r>Celladına aşık olmuşsa bir millet,

İster ezan ister çan dinlet.

İtiraz etmiyorsa sürü gibi millet,

Müstehaktır ona her türlü zillet.\"



Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #8 : 14 Eylül 2015 - 18:36:23 »
Alıntı yapılan: "ata"
şahsi fikrimdir ilk başlangıç için iyi bir saçimdir xbuntu xfce ve linux ortamına alışmanızı sağlar.sonrasında geliştikçe zaten kendiniz karar verirsiniz .manjaro önerecektim denemiş ve sorun yaşamışsınız . arch kurmayı başarmış olup onu devam ettirememek kötü bir dürüm manjaro ve arch kurulu kendı hurda pc me ama şimdiyekadar ufak sorrunlar hariç.

hiç kediliğinden sistem açılmadığına rastlamadım ,sisteme farklı ekrankartı kurdum yanlışlıkla onda bile loıng ekranından geri geldi .


Hocam şu anda chakra kurulu ve tek kelime ile muhteşem. Ubuntu'ya rakip bir işletim sistemi (yapılandırma bakımından). Şiddetle tavsiye ederim ve Arch tabanlı olması ayrıca bir özellik. Fakat  tema kurulumunun nasıl yapılacağını bulamadım konuyu saptırmak gibi olacak ama     yeni tema kurdan ekle diyorum yükleniyor diyor ama temalar arasında gözükmüyor tema dosyasını indirdim fakat kurulumu bilmiyorum yardımcı olursanız sevinirim ...
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı ata

  • İleti: 410
Re: Linux Önerisi
« Yanıtla #9 : 14 Eylül 2015 - 21:42:14 »


bir göz at fikir edinirsin .işlem hemen hemen aynıdır
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
<r>Celladına aşık olmuşsa bir millet,

İster ezan ister çan dinlet.

İtiraz etmiyorsa sürü gibi millet,

Müstehaktır ona her türlü zillet.\"



Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #10 : 14 Eylül 2015 - 22:03:16 »
Alıntı yapılan: "ata"


bir göz at fikir edinirsin .işlem hemen hemen aynıdır


Teşekkürler video için de rekonq diye bir tarayıcı kurulu     oda videoları açmıyor maalesef. Bir konu açtıktan sonra hemen deniyeceğim ilginiz için çok çok teşekkürler...
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı decent

  • Administrator
  • *****
  • İleti: 1.092
    • ARCHER KIM
  • Dağıtım: Arch Linux <:> Ubuntu
  • Sürüm: *
  • Ekran Kartı: Nvidia / ATI
Re: Linux Önerisi
« Yanıtla #11 : 14 Eylül 2015 - 23:22:48 »
Ekran kartın nedir ?


Kod: [Seç]
lspci | egrep -i "vga|3d"


Örnek:
Kod: [Seç]
lspci | egrep -i "vga|3d|display"
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770]
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »

Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #12 : 15 Eylül 2015 - 00:26:14 »
Alıntı yapılan: "decent"
Ekran kartın nedir ?


Kod: [Seç]
lspci | egrep -i "vga|3d"


Örnek:
Kod: [Seç]
lspci | egrep -i "vga|3d|display"
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770]




hocam kurulumu tazeledim sorun halloldu ilginiz için teşekkürler
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı shadow.

  • İleti: 126
Re: Linux Önerisi
« Yanıtla #13 : 15 Eylül 2015 - 10:11:13 »
Alıntı yapılan: "PcKopat"
@Emresaygın,  @cumali ye katılıyorum. Sadece Arch Linux değil düzgün yapılandırılmış hiçbir dağıtım durduk yere çökmez. Ha elektirikler kesilir yanlış veri yazımı olur donanımsal sıkıntı vardır o ayrı bir konu. Arch gibi yuvarlanan bir sistem istiyorsan(ki Arch tabanlı oluyor sanırım) bende Manjaro Linux u öneririm.Hem son kullanıcı açısından avantajlı hem de iyi iş çıkarıyorlar. Ha dersen ki çok stabil olsun Debian derim. Ama güncel program istiyorsan hüsrana uğrayabilirsin(Tabi sadece kendi depolarını kullanacaksan(Yanlışım varsa düzeltin -_-)). Dersen ki günceli takip etsin ama stabil de olsun Linux Mint derim. LMDE(Linix Mint Debian Edition) de sanırım yarı yuvarlanan bir sürüm olarak geçiyordu hiç kullanmadım ama araştırabilirsin ;)

LMDE yuvarlanmayı bıraktı.



Arch veya başka bir dağıtımın çalışırken en büyük sorunu: donanım üreticileri ve Pc toplayanların yapmış olduğu hatalardan meydana gelen sorunlar oluyor.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
\"Celladına aşık olmuşsa bir millet,

İster ezan ister çan dinlet.

İtiraz etmiyorsa sürü gibi millet,

Müstehaktır ona her türlü zillet.\"

Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #14 : 15 Eylül 2015 - 10:37:11 »
Alıntı yapılan: "shadow."
Alıntı yapılan: "PcKopat"
@Emresaygın,  @cumali ye katılıyorum. Sadece Arch Linux değil düzgün yapılandırılmış hiçbir dağıtım durduk yere çökmez. Ha elektirikler kesilir yanlış veri yazımı olur donanımsal sıkıntı vardır o ayrı bir konu. Arch gibi yuvarlanan bir sistem istiyorsan(ki Arch tabanlı oluyor sanırım) bende Manjaro Linux u öneririm.Hem son kullanıcı açısından avantajlı hem de iyi iş çıkarıyorlar. Ha dersen ki çok stabil olsun Debian derim. Ama güncel program istiyorsan hüsrana uğrayabilirsin(Tabi sadece kendi depolarını kullanacaksan(Yanlışım varsa düzeltin -_-)). Dersen ki günceli takip etsin ama stabil de olsun Linux Mint derim. LMDE(Linix Mint Debian Edition) de sanırım yarı yuvarlanan bir sürüm olarak geçiyordu hiç kullanmadım ama araştırabilirsin ;)

LMDE yuvarlanmayı bıraktı.



Arch veya başka bir dağıtımın çalışırken en büyük sorunu: donanım üreticileri ve Pc toplayanların yapmış olduğu hatalardan meydana gelen sorunlar oluyor.




Hocam pc tam uyumlu yani intel uyumlu herşeyi fakat dün tazelememe rağmen az öncede usb_submit_urb(ctrl) failed hatasını sürekli alıyorum ve format atmak zorunda kalıyorum sorun nedir anlamadım. Windows'da hiçbir sorun yok hatta sistem özelliklerim bide siz bakın :





Asus h61m-pro Anakart



İntel Core i3 3.2ghz İşlemci



6GB Kingston RAM



Nvidia gForce 210 Ekran Kartı ...
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />

Çevrimdışı shadow.

  • İleti: 126
Re: Linux Önerisi
« Yanıtla #15 : 15 Eylül 2015 - 13:01:16 »
Uzun destekli çekirdek sürümü deneyebilirsiniz.
Kod: [Seç]
sudo pacman -S linux-lts
Eğer sistem çekirdeğinde ya da işleyişte hata varsa diye yeniden başlatınca uçbirimde:
Kod: [Seç]
dmesg
çıktısına bir bakın derim.
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
\"Celladına aşık olmuşsa bir millet,

İster ezan ister çan dinlet.

İtiraz etmiyorsa sürü gibi millet,

Müstehaktır ona her türlü zillet.\"

Çevrimdışı Emresaygın

  • İleti: 65
Re: Linux Önerisi
« Yanıtla #16 : 15 Eylül 2015 - 13:23:34 »
Alıntı yapılan: "shadow."
Uzun destekli çekirdek sürümü deneyebilirsiniz.
Kod: [Seç]
sudo pacman -S linux-lts
Eğer sistem çekirdeğinde ya da işleyişte hata varsa diye yeniden başlatınca uçbirimde:
Kod: [Seç]
dmesg
çıktısına bir bakın derim.


Çıktısı :
Kod: [Seç]
dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.4-1-CHAKRA (almack@eevee) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 9 19:59:32 UCT 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e1827ff1-37bc-4d8e-8c52-767302d07a6b rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd6fbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd6fc000-0x00000000dd77afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd77b000-0x00000000dd7a3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dd7a4000-0x00000000dda0dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dda0e000-0x00000000de800fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de801000-0x00000000de801fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de802000-0x00000000de844fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de845000-0x00000000dec76fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dec77000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/H61M-PRO, BIOS 0408 11/25/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask F80000000 write-back
[    0.000000]   2 base 180000000 mask FF0000000 write-back
[    0.000000]   3 base 190000000 mask FF8000000 write-back
[    0.000000]   4 base 198000000 mask FFC000000 write-back
[    0.000000]   5 base 19C000000 mask FFE000000 write-back
[    0.000000]   6 base 19E000000 mask FFF000000 write-back
[    0.000000]   7 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01d4f000, 0x01d4ffff] PGTABLE
[    0.000000] BRK [0x01d50000, 0x01d50fff] PGTABLE
[    0.000000] BRK [0x01d51000, 0x01d51fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x19ee00000-0x19effffff]
[    0.000000]  [mem 0x19ee00000-0x19effffff] page 2M
[    0.000000] BRK [0x01d52000, 0x01d52fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x180000000-0x19edfffff]
[    0.000000]  [mem 0x180000000-0x19edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x160000000-0x17fffffff]
[    0.000000]  [mem 0x160000000-0x17fffffff] page 2M
[    0.000000] BRK [0x01d53000, 0x01d53fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdd6fbfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdd5fffff] page 2M
[    0.000000]  [mem 0xdd600000-0xdd6fbfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xde801000-0xde801fff]
[    0.000000]  [mem 0xde801000-0xde801fff] page 4k
[    0.000000] BRK [0x01d54000, 0x01d54fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xde845000-0xdec76fff]
[    0.000000]  [mem 0xde845000-0xde9fffff] page 4k
[    0.000000]  [mem 0xdea00000-0xdebfffff] page 2M
[    0.000000]  [mem 0xdec00000-0xdec76fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[    0.000000]  [mem 0xdeff4000-0xdeffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15fffffff]
[    0.000000]  [mem 0x100000000-0x15fffffff] page 2M
[    0.000000] RAMDISK: [mem 0x3795a000-0x37ca4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DD798078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DD7A24D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DD798180 00A352 (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DDA0C080 000040
[    0.000000] ACPI: APIC 0x00000000DD7A25E8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DD7A2660 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DD7A26A8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DD7A26E8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DD7A2720 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000DD7A3F30 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DD7A2AE8 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DD7A3498 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x19eff5000-0x19eff8fff]
[    0.000000]  [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880198600000-ffff88019e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000019effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dd6fbfff]
[    0.000000]   node   0: [mem 0x00000000de801000-0x00000000de801fff]
[    0.000000]   node   0: [mem 0x00000000de845000-0x00000000dec76fff]
[    0.000000]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000019effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019effffff]
[    0.000000] On node 0 totalpages: 1559255
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14125 pages used for memmap
[    0.000000]   DMA32 zone: 903995 pages, LIFO batch:31
[    0.000000]   Normal zone: 10176 pages used for memmap
[    0.000000]   Normal zone: 651264 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd6fc000-0xdd77afff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd77b000-0xdd7a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd7a4000-0xdda0dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdda0e000-0xde800fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde802000-0xde844fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdec77000-0xdeff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88019ec00000 s97368 r8192 d29608 u524288
[    0.000000] pcpu-alloc: s97368 r8192 d29608 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1534869
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e1827ff1-37bc-4d8e-8c52-767302d07a6b rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6054732K/6237020K available (5833K kernel code, 972K rwdata, 2576K rodata, 1208K init, 1176K bss, 182288K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000]  RCU kthread priority: 1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:456 16
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3297.941 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6598.71 BogoMIPS (lpj=10993136)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20150410
[    0.005348] ACPI: All ACPI Tables successfully acquired
[    0.005370] Security Framework initialized
[    0.005747] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.006935] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007479] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.007487] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.007656] Initializing cgroup subsys blkio
[    0.007658] Initializing cgroup subsys memory
[    0.007664] Initializing cgroup subsys devices
[    0.007666] Initializing cgroup subsys freezer
[    0.007667] Initializing cgroup subsys net_cls
[    0.007670] Initializing cgroup subsys perf_event
[    0.007671] Initializing cgroup subsys hugetlb
[    0.007688] CPU: Physical Processor ID: 0
[    0.007689] CPU: Processor Core ID: 0
[    0.007692] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.007693] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.007694] mce: CPU supports 7 MCE banks
[    0.007703] CPU0: Thermal monitoring enabled (TM1)
[    0.007707] process: using mwait in idle threads
[    0.007710] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.007710] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.007802] Freeing SMP alternatives memory: 20K (ffffffff81c22000 - ffffffff81c27000)
[    0.008889] ftrace: allocating 22129 entries in 87 pages
[    0.017220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.050174] TSC deadline timer enabled
[    0.050177] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[    0.050196] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.050211] ... version:                3
[    0.050212] ... bit width:              48
[    0.050213] ... generic registers:      4
[    0.050214] ... value mask:             0000ffffffffffff
[    0.050214] ... max period:             0000ffffffffffff
[    0.050215] ... fixed-purpose events:   3
[    0.050216] ... event mask:             000000070000000f
[    0.073608] x86: Booting SMP configuration:
[    0.073609] .... node  #0, CPUs:      #1
[    0.086754] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.090263]  #2 #3
[    0.123468] x86: Booted up 1 node, 4 CPUs
[    0.123471] smpboot: Total of 4 processors activated (26394.84 BogoMIPS)
[    0.125934] devtmpfs: initialized
[    0.127879] PM: Registering ACPI NVS region [mem 0xdd7a4000-0xdda0dfff] (2531328 bytes)
[    0.127918] PM: Registering ACPI NVS region [mem 0xde802000-0xde844fff] (274432 bytes)
[    0.127989] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.128056] pinctrl core: initialized pinctrl subsystem
[    0.128093] RTC time:  8:19:37, date: 09/15/15
[    0.128178] NET: Registered protocol family 16
[    0.133454] cpuidle: using governor ladder
[    0.140111] cpuidle: using governor menu
[    0.140168] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.140170] ACPI: bus type PCI registered
[    0.140172] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140255] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.140257] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.140323] PCI: Using configuration type 1 for base access
[    0.140485] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.147079] ACPI: Added _OSI(Module Device)
[    0.147080] ACPI: Added _OSI(Processor Device)
[    0.147081] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.147082] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149258] ACPI: Executed 1 blocks of module-level executable AML code
[    0.151341] ACPI: Dynamic OEM Table Load:
[    0.151347] ACPI: SSDT 0xFFFF880196D05000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.151756] ACPI: Dynamic OEM Table Load:
[    0.151760] ACPI: SSDT 0xFFFF880196CBD400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.152117] ACPI: Dynamic OEM Table Load:
[    0.152120] ACPI: SSDT 0xFFFF880196CC3600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.152856] ACPI: Interpreter enabled
[    0.152861] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S1_] (20150410/hwxface-580)
[    0.152865] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2_] (20150410/hwxface-580)
[    0.152875] ACPI: (supports S0 S3 S4 S5)
[    0.152876] ACPI: Using IOAPIC for interrupt routing
[    0.152895] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157520] ACPI: Power Resource [FN00] (off)
[    0.157589] ACPI: Power Resource [FN01] (off)
[    0.157656] ACPI: Power Resource [FN02] (off)
[    0.157720] ACPI: Power Resource [FN03] (off)
[    0.157784] ACPI: Power Resource [FN04] (off)
[    0.158265] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.158269] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.158359] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.158440] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.158441] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.158768] PCI host bridge to bus 0000:00
[    0.158770] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.158772] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.158773] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.158774] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.158776] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.158777] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.158778] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.158779] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.158781] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.158782] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.158783] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.158789] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.158859] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.158882] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.158916] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.158973] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.158992] pci 0000:00:16.0: reg 0x10: [mem 0xf730a000-0xf730a00f 64bit]
[    0.159057] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.159130] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.159146] pci 0000:00:1a.0: reg 0x10: [mem 0xf7308000-0xf73083ff]
[    0.159220] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.159266] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.159301] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.159316] pci 0000:00:1b.0: reg 0x10: [mem 0xf7300000-0xf7303fff 64bit]
[    0.159379] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.159418] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.159451] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.159516] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.159553] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.159587] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.159651] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.159688] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.159721] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[    0.159786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.159823] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.159857] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.159922] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.159959] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.159995] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.160011] pci 0000:00:1d.0: reg 0x10: [mem 0xf7307000-0xf73073ff]
[    0.160087] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.160134] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.160169] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.160320] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.160334] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.160340] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.160347] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.160354] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.160360] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.160367] pci 0000:00:1f.2: reg 0x24: [mem 0xf7306000-0xf73067ff]
[    0.160399] pci 0000:00:1f.2: PME# supported from D3hot
[    0.160461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.160474] pci 0000:00:1f.3: reg 0x10: [mem 0xf7305000-0xf73050ff 64bit]
[    0.160493] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.160598] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[    0.160607] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.160615] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.160623] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.160628] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.160634] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.160696] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.160704] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.170085] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.170089] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.170093] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.170098] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.170175] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.170249] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.170280] pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf7207fff 64bit]
[    0.170426] pci 0000:03:00.0: PME# supported from D3cold
[    0.170452] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.180073] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.180081] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.180175] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.180296] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.180326] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[    0.180335] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.180336] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.180338] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.180339] pci 0000:00:1c.3:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.180340] pci 0000:00:1c.3:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.180341] pci 0000:00:1c.3:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.180343] pci 0000:00:1c.3:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.180344] pci 0000:00:1c.3:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.180345] pci 0000:00:1c.3:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.180346] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.180455] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.180476] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.180477] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.180478] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.180479] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.180481] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.180482] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.180483] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.180484] pci 0000:04:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.180486] pci 0000:04:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.180487] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.180560] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    0.180582] pci 0000:06:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.180615] pci 0000:06:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[    0.180635] pci 0000:06:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.180737] pci 0000:06:00.0: supports D1 D2
[    0.180738] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180770] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.190064] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.190070] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.190075] pci 0000:00:1c.5:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.190082] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.190540] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.190580] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.190619] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.190657] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.190695] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.190733] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.190770] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.190809] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.191002] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.191092] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.191094] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.191095] vgaarb: loaded
[    0.191096] vgaarb: bridge control possible 0000:01:00.0
[    0.191166] PCI: Using ACPI for IRQ routing
[    0.192556] PCI: pci_cache_line_size set to 64 bytes
[    0.192600] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.192601] e820: reserve RAM buffer [mem 0xdd6fc000-0xdfffffff]
[    0.192603] e820: reserve RAM buffer [mem 0xde802000-0xdfffffff]
[    0.192604] e820: reserve RAM buffer [mem 0xdec77000-0xdfffffff]
[    0.192605] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.192606] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
[    0.192696] NetLabel: Initializing
[    0.192697] NetLabel:  domain hash size = 128
[    0.192698] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.192708] NetLabel:  unlabeled traffic allowed by default
[    0.192728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.192732] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.194749] Switched to clocksource hpet
[    0.199014] pnp: PnP ACPI init
[    0.199107] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.199110] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.199171] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.199173] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.199174] system 00:01: [io  0xffff] has been reserved
[    0.199176] system 00:01: [io  0xffff] has been reserved
[    0.199177] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.199178] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.199180] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.199181] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.199183] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199209] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.199247] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.199249] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.199313] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.199315] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199499] pnp 00:05: [dma 0 disabled]
[    0.199569] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.199608] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.199610] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199760] pnp 00:07: [dma 0 disabled]
[    0.199798] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.199961] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.199963] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.199964] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.199966] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.199967] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.199969] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.199970] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.199972] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.199973] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.199975] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.199976] system 00:08: [mem 0xf2200000-0xf2200fff] has been reserved
[    0.199978] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.200069] pnp: PnP ACPI: found 9 devices
[    0.206089] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.206137] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.206139] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.206142] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.206144] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.206146] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.206156] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.206160] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.206167] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.206186] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.206196] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.206198] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.206202] pci 0000:00:1c.5:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.206205] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.206211] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.206212] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.206213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.206215] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.206216] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.206217] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.206218] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.206220] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.206221] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.206222] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.206223] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.206225] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.206226] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.206227] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.206229] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.206230] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.206231] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.206232] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.206234] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.206235] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.206236] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.206237] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.206238] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.206240] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.206241] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.206242] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.206243] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.206245] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.206246] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.206247] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.206248] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.206249] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.206251] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.206252] pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.206253] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.206254] pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.206255] pci_bus 0000:06: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.206291] NET: Registered protocol family 2
[    0.206450] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.206562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.206660] TCP: Hash tables configured (established 65536 bind 65536)
[    0.206683] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.206706] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.206772] NET: Registered protocol family 1
[    0.241467] pci 0000:01:00.0: Video device with shadowed ROM
[    0.241589] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.241640] Unpacking initramfs...
[    0.283408] Freeing initrd memory: 3372K (ffff88003795a000 - ffff880037ca5000)
[    0.283418] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.283420] software IO TLB [mem 0xd96fc000-0xdd6fc000] (64MB) mapped at [ffff8800d96fc000-ffff8800dd6fbfff]
[    0.283470] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.283471] hw unit of domain pp0-core 2^-16 Joules
[    0.283472] hw unit of domain package 2^-16 Joules
[    0.283472] hw unit of domain pp1-gpu 2^-16 Joules
[    0.283583] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[    0.283591] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[    0.283595] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[    0.283599] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[    0.283645] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.283666] Scanning for low memory corruption every 60 seconds
[    0.283871] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.283884] Initialise system trusted keyring
[    0.284207] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.284232] zpool: loaded
[    0.284234] zbud: loaded
[    0.284342] VFS: Disk quotas dquot_6.6.0
[    0.284357] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.284449] Key type big_key registered
[    0.284615] Key type asymmetric registered
[    0.284619] Asymmetric key parser 'x509' registered
[    0.284633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.284664] io scheduler noop registered
[    0.284666] io scheduler deadline registered
[    0.284675] io scheduler cfq registered (default)
[    0.285067] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.285080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.285089] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.285090] vesafb: scrolling: redraw
[    0.285091] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.285099] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90001000000, using 1216k, total 1216k
[    0.297296] Console: switching to colour frame buffer device 80x30
[    0.309442] fb0: VESA VGA frame buffer device
[    0.309455] intel_idle: MWAIT substates: 0x1120
[    0.309456] intel_idle: v0.4 model 0x2A
[    0.309457] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.309599] GHES: HEST is not enabled!
[    0.309653] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.330187] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.330505] Linux agpgart interface v0.103
[    0.330771] rtc_cmos 00:02: RTC can wake from S4
[    0.330887] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.330913] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.330922] Intel P-state driver initializing.
[    0.331012] ledtrig-cpu: registered to indicate activity on CPUs
[    0.331394] NET: Registered protocol family 10
[    0.331643] NET: Registered protocol family 17
[    0.332101] Loading compiled-in X.509 certificates
[    0.332120] registered taskstats version 1
[    0.332558]   Magic number: 15:263:321
[    0.332569] tty tty46: hash matches
[    0.332649] rtc_cmos 00:02: setting system clock to 2015-09-15 08:19:37 UTC (1442305177)
[    0.332770] PM: Hibernation image not present or could not be loaded.
[    0.333133] Freeing unused kernel memory: 1208K (ffffffff81af4000 - ffffffff81c22000)
[    0.333136] Write protecting the kernel read-only data: 10240k
[    0.333447] Freeing unused kernel memory: 300K (ffff8800015b5000 - ffff880001600000)
[    0.333867] Freeing unused kernel memory: 1520K (ffff880001884000 - ffff880001a00000)
[    0.342066] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.345312] SCSI subsystem initialized
[    0.346664] libata version 3.00 loaded.
[    0.347310] ahci 0000:00:1f.2: version 3.0
[    0.347458] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.347460] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    0.351551] scsi host0: ahci
[    0.351665] scsi host1: ahci
[    0.351954] scsi host2: ahci
[    0.352235] scsi host3: ahci
[    0.352311] ata1: SATA max UDMA/133 abar m2048@0xf7306000 port 0xf7306100 irq 25
[    0.352314] ata2: SATA max UDMA/133 abar m2048@0xf7306000 port 0xf7306180 irq 25
[    0.352316] ata3: DUMMY
[    0.352317] ata4: DUMMY
[    0.670679] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.670703] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.671299] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[    0.671304] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8801980b0d10), AE_NOT_FOUND (20150410/psparse-536)
[    0.671553] ata2.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
[    0.671558] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.672329] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[    0.672335] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8801980b0d10), AE_NOT_FOUND (20150410/psparse-536)
[    0.673020] ata2.00: configured for UDMA/133
[    0.673764] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[    0.673769] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8801980b0d88), AE_NOT_FOUND (20150410/psparse-536)
[    0.673777] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
[    0.677546] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[    0.677551] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8801980b0d88), AE_NOT_FOUND (20150410/psparse-536)
[    0.677560] ata1.00: configured for UDMA/100
[    0.686076] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL01 PQ: 0 ANSI: 5
[    0.695881] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 3E01 PQ: 0 ANSI: 5
[    0.697851] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.697894] sd 1:0:0:0: [sda] Write Protect is off
[    0.697899] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.697915] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.698688] ACPI: bus type USB registered
[    0.698742] usbcore: registered new interface driver usbfs
[    0.698768] usbcore: registered new interface driver hub
[    0.698809] usbcore: registered new device driver usb
[    0.700393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.714329] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.714335] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.714755] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.715222]  sda: sda1
[    0.715503] sd 1:0:0:0: [sda] Attached SCSI disk
[    0.718487] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.720636] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.720702] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.727568] ehci-pci: EHCI PCI platform driver
[    0.727732] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727740] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727753] ehci-pci 0000:00:1a.0: debug port 2
[    0.731647] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.731665] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7308000
[    0.740560] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.740983] hub 1-0:1.0: USB hub found
[    0.740998] hub 1-0:1.0: 2 ports detected
[    0.741244] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.741254] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.801535] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[    0.801858] hub 2-0:1.0: USB hub found
[    0.801868] hub 2-0:1.0: 2 ports detected
[    0.801963] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.801967] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.801970] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.801978] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.801999] ehci-pci 0000:00:1d.0: debug port 2
[    0.802015] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.802202] hub 3-0:1.0: USB hub found
[    0.802214] hub 3-0:1.0: 2 ports detected
[    0.805897] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.805902] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7307000
[    0.813759] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.813947] hub 4-0:1.0: USB hub found
[    0.813952] hub 4-0:1.0: 2 ports detected
[    1.046738] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.074845] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.119956] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.170606] hub 1-1:1.0: USB hub found
[    1.170774] hub 1-1:1.0: 4 ports detected
[    1.244022] hub 4-1:1.0: USB hub found
[    1.244204] hub 4-1:1.0: 6 ports detected
[    1.283034] tsc: Refined TSC clocksource calibration: 3297.877 MHz
[    1.283041] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2f8976b3d81, max_idle_ns: 440795303867 ns
[    1.509335] usb 4-1.2: new low-speed USB device number 3 using ehci-pci
[    1.665746] usb 4-1.3: new low-speed USB device number 4 using ehci-pci
[    1.838799] usb 4-1.4: new high-speed USB device number 5 using ehci-pci
[    2.028492] usb 4-1.6: new high-speed USB device number 6 using ehci-pci
[    2.281592] Switched to clocksource tsc
[    2.844864] systemd[1]: Cannot add dependency job for unit cups.service, ignoring: Unit cups.service failed to load: No such file or directory.
[    3.731410] scsi host4: vhba
[    3.764470] EXT4-fs (sda1): re-mounted. Opts: (null)
[    5.210201] systemd-journald[163]: Received request to flush runtime journal from PID 1
[    5.675316] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.688028] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[    5.688803] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
[    5.688852] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[    5.689316] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
[    5.689361] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[    5.689840] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
[    5.689908] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[    5.690365] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
[    5.811483] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    5.983087] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.432592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.432597] ACPI: Power Button [PWRB]
[    6.432646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.432648] ACPI: Power Button [PWRF]
[    6.439828] thermal LNXTHERM:00: registered as thermal_zone0
[    6.439831] ACPI: Thermal Zone [TZ00] (28 C)
[    6.440041] thermal LNXTHERM:01: registered as thermal_zone1
[    6.440043] ACPI: Thermal Zone [TZ01] (30 C)
[    6.448362] wmi: Mapper loaded
[    6.521496] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.561441] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (PMIO) (20150410/utaddress-254)
[    6.561448] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.561452] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (GPIO) (20150410/utaddress-254)
[    6.561456] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (_SB_.PCI0.LPCB.GPBX) (20150410/utaddress-254)
[    6.561459] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.561461] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (GPIO) (20150410/utaddress-254)
[    6.561464] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (_SB_.PCI0.LPCB.GPBX) (20150410/utaddress-254)
[    6.561470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.561483] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (GPIO) (20150410/utaddress-254)
[    6.561486] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (_SB_.PCI0.LPCB.GPBX) (20150410/utaddress-254)
[    6.561491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.561492] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.561494] parport_pc 00:05: reported by Plug and Play ACPI
[    6.561543] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    6.904192] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.904203] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.907258] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[    6.907263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.911454] r8169 0000:06:00.0 eth0: RTL8168g/8111g at 0xffffc90000c6e000, 38:2c:4a:b0:c0:e4, XID 0c000800 IRQ 32
[    6.911457] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    6.918716] r8169 0000:06:00.0 enp6s0: renamed from eth0
[    6.936371] ppdev: user-space parallel port driver
[    6.940053] iTCO_vendor_support: vendor-support=0
[    6.948550] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.948588] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    6.948674] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.996566] snd_hda_intel 0000:01:00.1: Disabling MSI
[    6.996572] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    7.000535] [drm] Initialized drm 1.1.0 20060810
[    7.048061] asus_wmi: ASUS WMI generic driver loaded
[    7.053771] asus_wmi: Initialization: 0x0
[    7.053788] asus_wmi: BIOS WMI version: 0.9
[    7.053817] asus_wmi: SFUN value: 0x0
[    7.054061] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[    7.054992] asus_wmi: Disabling ACPI video driver
[    7.063617] hidraw: raw HID events driver (C) Jiri Kosina
[    7.090420] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.090423] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.090424] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.090425] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.090426] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    7.090427] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.090429] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    7.090431] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    7.090432] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    7.100333] checking generic (f1000000 130000) vs hw (e0000000 10000000)
[    7.100336] checking generic (f1000000 130000) vs hw (f0000000 2000000)
[    7.100337] fb: switching to nouveaufb from VESA VGA
[    7.100351] Console: switching to colour dummy device 80x25
[    7.100683] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a8280b1
[    7.100685] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[    7.100686] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[    7.101458] usb 4-1.4: current rate 0 is different from the runtime rate 16000
[    7.103085] usb-storage 4-1.6:1.0: USB Mass Storage device detected
[    7.103150] scsi host5: usb-storage 4-1.6:1.0
[    7.103210] usbcore: registered new interface driver usb-storage
[    7.103429] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.103487] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.103538] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.103607] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.103670] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.105022] usb 4-1.4: current rate 0 is different from the runtime rate 48000
[    7.111115] usbcore: registered new interface driver uas
[    7.118010] usbcore: registered new interface driver usbhid
[    7.118013] usbhid: USB HID core driver
[    7.119314] usbcore: registered new interface driver snd-usb-audio
[    7.181477] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:1BCF:0007.0001/input/input11
[    7.181665] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    7.181820] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:1A2C:0027.0002/input/input12
[    7.214649] media: Linux media interface: v0.10
[    7.219346] Linux video capture interface: v2.00
[    7.220223] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[    7.220288] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    7.220291] nouveau  [   VBIOS][0000:01:00.0] version 70.18.49.00.00
[    7.220577] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    7.220601] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[    7.220602] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[    7.220604] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 960 tags
[    7.221677] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[    7.233434] hid-generic 0003:1A2C:0027.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.3/input0
[    7.267345] intel_rapl: Found RAPL domain package
[    7.267348] intel_rapl: Found RAPL domain core
[    7.267350] intel_rapl: Found RAPL domain uncore
[    7.331493] uvcvideo: Found UVC 1.00 device USB2.0_Camera (093a:2700)
[    7.339153] input: USB2.0_Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input13
[    7.339215] usbcore: registered new interface driver uvcvideo
[    7.339217] USB Video Class driver (1.1.1)
[    7.654556] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    7.654616] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    7.654674] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    7.654718] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    8.102458] scsi 5:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 6
[    8.103202] sd 5:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[    8.104197] sd 5:0:0:0: [sdb] Write Protect is off
[    8.104199] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    8.105194] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    8.109068]  sdb: sdb1 sdb2
[    8.111809] sd 5:0:0:0: [sdb] Attached SCSI disk
[    8.284978] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    8.284988] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    8.284991] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    8.304985] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[    8.304988] nouveau  [     CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 500 MHz
[    8.305007] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[    8.305134] [TTM] Zone  kernel: Available graphics memory: 3030576 kiB
[    8.305136] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    8.305137] [TTM] Initializing pool allocator
[    8.305141] [TTM] Initializing DMA pool allocator
[    8.305149] nouveau  [     DRM] VRAM: 1024 MiB
[    8.305150] nouveau  [     DRM] GART: 1048576 MiB
[    8.305153] nouveau  [     DRM] TMDS table version 2.0
[    8.305154] nouveau  [     DRM] DCB version 4.0
[    8.305155] nouveau  [     DRM] DCB outp 00: 01000302 00020030
[    8.305157] nouveau  [     DRM] DCB outp 01: 02000300 00000000
[    8.305158] nouveau  [     DRM] DCB outp 02: 02011362 00020010
[    8.305159] nouveau  [     DRM] DCB outp 03: 01022310 00000000
[    8.305160] nouveau  [     DRM] DCB conn 00: 00001030
[    8.305162] nouveau  [     DRM] DCB conn 01: 00002161
[    8.305163] nouveau  [     DRM] DCB conn 02: 00000200
[    8.316297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.316298] [drm] Driver supports precise vblank timestamp query.
[    8.328715] nouveau  [     DRM] MM: using COPY for buffer copies
[    8.393448] nouveau  [     DRM] allocated 1600x900 fb: 0x70000, bo ffff88019628c800
[    8.393509] fbcon: nouveaufb (fb0) is primary device
[    8.460414] Console: switching to colour frame buffer device 200x56
[    8.461719] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    8.461720] nouveau 0000:01:00.0: registered panic notifier
[    8.491309] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
[   10.726901] r8169 0000:06:00.0 enp6s0: link down
[   10.726909] r8169 0000:06:00.0 enp6s0: link down
[   12.417365] r8169 0000:06:00.0 enp6s0: link up
[   14.877788] random: nonblocking pool is initialized
[   17.217535] hid-generic 0003:1A2C:0027.0003: usb_submit_urb(ctrl) failed: -1
[   17.217567] hid-generic 0003:1A2C:0027.0003: timeout initializing reports
[   17.217739] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:1A2C:0027.0003/input/input18
[   17.270683] hid-generic 0003:1A2C:0027.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.3/input1
[   17.287581] mousedev: PS/2 mouse device common for all mice
[   44.242115] usb 4-1.4: current rate 0 is different from the runtime rate 48000
[   44.243867] usb 4-1.4: current rate 0 is different from the runtime rate 48000
[   44.262986] usb 4-1.4: current rate 0 is different from the runtime rate 48000
[   44.264533] usb 4-1.4: current rate 0 is different from the runtime rate 48000
[  896.966575] ISO 9660 Extensions: RRIP_1991A
[ 6193.692222] [UFW BLOCK] IN=enp6s0 OUT= MAC=38:2c:4a:b0:c0:e4:54:22:f8:c8:1e:e0:08:00 SRC=192.168.2.1 DST=192.168.2.2 LEN=414 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=57847 DPT=53089 LEN=394
[ 6231.138616] [UFW BLOCK] IN=enp6s0 OUT= MAC=38:2c:4a:b0:c0:e4:54:22:f8:c8:1e:e0:08:00 SRC=192.168.2.1 DST=192.168.2.2 LEN=414 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=33654 DPT=34217 LEN=394
« Son Düzenleme: 01 Ocak 1970 - 02:00:00 Gönderen: Guest »
http://www.splitbrain.org/_media/blog/2008-05/archlinux.png" alt="" class="bbc_img" />